Getting Started - Cisco SPA302D Owner's Manual

Getting Started

The Cordless Handsets and Cordless Base are shipped to you
preconfigured. You do not have to do any configuring or program-
ming of the Cordless Handset. Each Cordless Handset has been
assigned a phone number and extension number. This section de-
scribes the function of the lights on the Cordless Base and some
of the initial phone startup screens.
Cordless Base Basics
The Cordless Base provides wireless connectivity to the Cordless
Handsets. The Lights on the top of the Cordless Base indicate the
current status. After the initial installation and activation, the
SYSTEM and INTERNET lights should remain lit.
The following describes the indicator lights, ports and buttons on
the Cordless Base which, in turn, provides information on the op-
erating state.
Feature Description
Steady green-The system is ready.
Slow flashing green- Acquiring an IP address, if appli-
cable. (DHCP is used by default.)
Fast flashing green-Upgrading the firmware.
Off-There is no power or the system cannot boot up.
SYSTEM
Flashing green-Transmitting or receiving data
through the WAN port.
Off-No link.
INTERNET
22
Owner's Manual