Note; Setting Up The Cordless Handsets - Cisco SPA302D Owner's Manual

The ports labeled "PHONE" and "LINE" at the rear of the Cordless
Base are not used. Do not connect anything to these connectors.

Note

The "RESET" button at the rear of the Cordless Base is not used.
Pressing the RESET button will make your Cordless Base
inoperable and require replacement.
WARNING

Setting up the Cordless Handsets

4. Open Cordless Handset box and remove the Cordless
Handset, Power Clip, Power Adapter, and Charging Cradle.
5. Each Cordless Handset purchased from Intermedia will come
with batteries pre-installed. Batteries must be charged for 10
hours prior to first use. See instructions for installing batteries if
not installed.
6. Remove the protective film from the Handset and charging
cradle.
7. Install the optional Belt Clip on the Cordless Handset
Owner's Manual
14