Adam Equipment Eclipse EBL Series Operating Manual page 32

EN
ACCUMULATION
• Press [Mode] and then [Up] or [Down] to select "
press [Select] to enter the function. The display will show zeros in both main and
upper display areas, accompanied by "
balance is in the Net/Total mode.
• Place the first item. The net weight will be displayed in the main display and the upper
display line will still display zeros.
• Press [Select]. The main display will show zeros and the upper display line will show
the first net weight as total net weight.
• Remove the item from the pan and then press [
The upper display line will still show the total net weight.
• Place a second item on the pan. The main display will show the weight of the second
item. Pressing [Select] will zero the main display and the upper display line will now
show the total weight of both of the items. Remove the item and press [
zero the main display. The upper display line will still show the accumulated total
weight.
• Continue adding required items to the pan one by one, as above.
• When the last item has been weighed and added, press [Mode] to display the total
of the net weights to the main display e.g. "
Pressing [Print] will print a report to a connected device which contains individual net
weights followed by the final net weight total.
e.g.:
NET / TOT
Ser No: AE9U0123
ID No: 1
Date: 14/07/2015
Time: 15:00:03
Net 01: 1.234 g
Net 02: 5.678 g
Net 03: 9.123 g
Total: 16.035 g
© Adam Equipment Company 2015
NEt TOT NEt TOT
NEt TOT NEt TOT
" for Net/Total mode. Now
NT NT NT NT
" in the upper display line to indicate that the
0/T] to zero the main display.
NET TOT NET TOT NET TOT NET TOT
XXX.XXX g".
30
3016612482 Rev1-Aug15
0/T] to