EN
9 INPUT/OUTPUT
The rear panel has some or all of the following connectors depending on model:
• RS-232 serial - 9 pin d-subminiature plug.
• Remote display connector (USB type A socket).
• I/O connector (USB type B socket).
• Power input socket. (Required power input is a low-voltage external supply, 18VDC
@ 830mA for all models). Accepts concentric barrel plug 11.4mm length X 5.5mm
outside diameter X 2.1mm centre diameter. Centre positive.
RS232 and I/O can be connected and used individually or simultaneously, so a printer and
terminal or PC can both be connected. The connection is serial data format only and
cannot be used for flash memory or other similar USB devices.
There is also a battery cover and slot for the optional rechargeable NiMH battery pack (if
available with your model). Due to the high power requirements of the analytical balance
weighing mechanism and the internal calibration mechanism, it is not recommended to use
battery power for these options.
© Adam Equipment Company 2015
17
3016612482 Rev1-Aug15