Enable or disable System wake on alarm event. Select
FixedTime, System will wake on the hr::min::sec specified.
Select DynamicTime , System will wake on the current time
+ Increase minute(s).
CPU Configuration
Socket 0 CPU Information
Socket specific CPU Information.
IDE Configuration
Serial-ATA (SATA)
Enable / disable Serial ATA.
SATA Test Mode
Test Mode enable / disable.
SATA Speed Support
SATA Speed Support Gen1 or Gen2.
SATA ODD Port
SATA ODD is Port0 or Port1.
SATA Mode
Select IDE / AHCI
Serial-ATA Port 0
Enable / Disable Serial ATA Port 0.
SATA Port0 HotPlug
Enable / Disable SATA Port0 HotPlug.
Serial-ATA Port 1
Enable / Disable Serial ATA Port 1.
SATA Port0 HotPlug
Enable / Disable SATA Port1 HotPlug
Embedded Controller Configuration
Lock key click time
Number of seconds to press lock key to (un)active.
1~10 seconds mean press hold time.
Locked Status Hold Time
WMP-19B/22B User's manual
23