1. Manuals
  2. Brands
  3. Wincomm Manuals
  4. Touch Panel
  5. WMP-248
  6. User manual

Wincomm WMP-248 User Manual

Medical panel pc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WMP-248/249
Medical Panel PC
USER'S MANUAL
P/N: 205G000WMP2480, V1.0
Copyright© ,2014. All rights reserved
All other brand names are registered trademarks of their respective owners.
The information contained in this document is subject to change without notice

Advertisement

Table of Contents
loading

Related Manuals for Wincomm WMP-248

Summary of Contents for Wincomm WMP-248

  • Page 1 WMP-248/249 Medical Panel PC USER’S MANUAL P/N: 205G000WMP2480, V1.0 Copyright© ,2014. All rights reserved All other brand names are registered trademarks of their respective owners. The information contained in this document is subject to change without notice...
  • Page 2 Version Change History Date Version Description Remark 2014/4/17 First release James.Chiu WMP-248/249 User’s manual...
  • Page 3  Intel is a trademark or registered trademark of Intel Corporation.  Microsoft Windows is a registered trademark of Microsoft Corporation.  Winbond is a registered trademark of Winbond Electronics Corporation. All other product names or trademarks are properties of their respective owners. WMP-248/249 User’s manual...
  • Page 4 To avoid risk of electric shock, this equipment must only be connected to a supply mains with protective earth. Do not modify this equipment without authorization of the manufacturer. WMP-248/249 User’s manual...

  • Page 5: Safety Instructions

    Safety Instructions Intended use The WMP-248/249 is intended to serve as a medical monitor which is designed for general purpose for hospital environment and for diagnosis. It could be used for Surgical, Radiology, PACS (Picture Archiving Communication Systems), LIS (Lab Information Systems) and Electronic Medical Record purpose.
  • Page 6 If your hands are wet, do not touch the plug. Use your thumb and index finger, grip firmly on the power cord to disconnect from the electrical socket. By pulling the power cord, may result in damaging it. WMP-248/249 User’s manual...
  • Page 7 Unless proper ventilation is present, do not place unit in an enclosed area; such as a built-in shelf. Keep a minimum distance of 10 cm between the display unit and wall. WMP-248/249 User’s manual...
  • Page 8 (f) When the functions of the unit are dysfunctional. When replacement parts are needed for the medical panel PC unit, make sure service technicians use replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original viii WMP-248/249 User’s manual...
  • Page 9 The mark on electrical and electronic products only applies to the current European Union Member States. WMP-248/249 User’s manual...
  • Page 10 IEC 60601-1-1. The unit is for exclusive interconnection with IEC 60601-1 certified equipment in the patient environment and IEC 60XXX certified equipment outside of the patient environment. If in doubt, consult the technical services department or your local representative. WMP-248/249 User’s manual...

  • Page 11: Contact Information

    C) Caution: This adapter SPI FSP180-AHAM1 is a forming part of the medical device Contact information: 3F, No.14, Prosperity Road II, Science-Based Industrial Park, Hsinchu, Taiwan 300, R.O.C TEL: (886) 3 5780000 E-Mail: Sales@wincomm.com.tw WMP-248/249 User’s manual...

  • Page 12: Table Of Contents

    Disconnect Device ............19 BIOS Setup ............20 Appendix .............. 30 A. Jumper settings and Connectors ..... 30 B. L type Stand (optional kit) ........ 53 C. Battery Pack Specifications (optional kit) ..54 D. Scrap Computer Recycling ........ 55 WMP-248/249 User’s manual...

  • Page 13: Introduction

    Introduction Product Description The WMP-248/249 Medical Panel PC are based on Intel 4th generation Core i processor which can deliver faster graphic with higher CPU performance. It accommodates two SATA III devices and up to 16GB DDR3 SODIMM. The high brightness LCD, Low noise (WMP-248) / Fanless...

  • Page 14: Package List

    Before you begin installing your Medical Station, please make sure that the following items have been shipped:  The WMP-248 or WMP-249 Medical Panel PC unit  One DVD containing user manual, chipset drivers  Power Adapter x 1 (Mf:SPI, type/model: FSP180-AHAM1) ...

  • Page 15: Features

    Low noise Smart fan solution  Anti-bacteria (MRSA) plastic housing  Built-in Battery backup function (option)  Supports PCI-E x 16 or PCI expansion slot (option)  Support isolated module by different configuration (optional  order configuration) WMP-248/249 User’s manual...

  • Page 16: Specifications

    Reset x 1 DC-in Jack x 1(with lock function) Two 5W speaker on back side Isolation: 4KV isolated RS-232 x 1, RS-232/422/485 x 1 4KV isolated USB 2.0 x 1 (Full speed) 4KV isolated Lan x 1 (Gigabit) WMP-248/249 User’s manual...
  • Page 17 VESA 75/100mm Construction 3mm ABS + PC TYPE Plastic housing Dimension (WxHxD) 606 x 398 x 65.6 mm WMP-248: 8.5kg (w/o power adapter) Net Weight WMP-249: 9.0kg (w/o power adapter) Packing Filler Environmental Specifications Operating: 0°C to 40°C (32°F ~104°F) Temperature Storage, Transportation: -20°C to 60°C (-4°F...

  • Page 18: Guidance And Manufacturer's Declaration - Electromagnetic Emissions

    Guidance and manufacturer’s declaration – electromagnetic emissions The model WMP-248/249 is intended for use in the electromagnetic environment specified below. The customer or the user of the model WMP-248/249 should assure that it is used in such an environment. Electromagnetic environment – Emissions test Compliance guidance WMP-248/249 User’s manual...
  • Page 19 The model WMP-248/249 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the model WMP-248/249 can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment...

  • Page 20: Guidance And Manufacturer's Declaration - Electromagnetic Immunity

    Guidance and manufacturer’s declaration – electromagnetic immunity The model WMP-248/249 is intended for use in the electromagnetic environment specified below. The customer or the user of the model WMP-248/249 should assure that it is used in such an environment. Immunity test IEC 60601 Compliance Electromagnetic environment –...

  • Page 21: Guidance And Manufacturer's Declaration - Electromagnetic Immunity

    Guidance and manufacturer’s declaration – electromagnetic immunity The model WMP-248/249 is intended for use in the electromagnetic environment specified below. The customer or the user of the model WMP-248/249 should assure that it is used in such an environment. Immunity Electromagnetic environment –...
  • Page 22 If the measured field strength in the location in which the model WMP-248/249 is used exceeds the applicable RF compliance level above, the model WMP-248/249 should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the model WMP-248/249.

  • Page 23: Cleaning/Disinfecting

    Cleaning/Disinfecting  Steps: 1. Wipe the WMP-248/249 with a dry clean cloth. 2. Prepare agent per manufacturer’s instructions or hospital protocol.  Cautions: Do not immerse or rinse the WMP-248/249 and its  peripherals. If you accidentally spill liquid on the device, disconnect the unit from the power source.

  • Page 24: Getting Started

    USB-CD/DVD drive, turn on computer power, keep on pressing “F11” key, go into BIOS quick boot menu, select “USB-CD ROM”, WAIT FOR 20 SECONDS, then press enter, system OS will boot up from USB-CD/DVD drive directly. WMP-248/249 User’s manual...

  • Page 25: Dimension

    Dimension WMP-248 (VESA Mount Screw type: M4) WMP-248/249 User’s manual...
  • Page 26 WMP-249 (VESA Mount Screw type: M4) WMP-248/249 User’s manual...

  • Page 27: System View

    1-2 Down. Battery1(Green) & Battery2(Yellow): LED 1 LED 2 (Charge/Discharge/Low) (Batt present/ not present) In charge blinking Discharge Full charge Low battery blinking blinking No battery 2. Power Button (with LED status indicator: ON: Green, OFF: dark) Operation: always on. WMP-248/249 User’s manual...
  • Page 28 10. Clean me (with LED status indicator: ON: Yellow, OFF: dark) a. Keep on contacting 5 seconds to active b. keep contacting 5 seconds to release c. auto release after 60 seconds 11. Fn: Function key (with LED status indicator: ON: Green, OFF: dark) WMP-248/249 User’s manual...
  • Page 29 Side View Standard model without Customized model with door DVD (or Smart card reader) Rear View WMP-248 (Fan) WMP-249 (Fanless) WMP-248/249 User’s manual...
  • Page 30 I/O parts (Standard version) I/O parts (Isolated version) isolation isolated COM 4KV isolated RS-232 x 1, RS-232/422/485 x 1 isolated USB 4KV isolated USB 2.0 x 1 (Full speed) isolated LAN 4KV isolated Lan x 1 (Gigabit) WMP-248/249 User’s manual...

  • Page 31: Disconnect Device

    Disconnect Device  Unplug the power cord from the power adapter jack to disconnect the device. WMP-248/249 User’s manual...

  • Page 32: Bios Setup

    <PgUp> and <PgDn> keys to change entries, <F1> for help and <Esc> to quit. When you enter the Setup utility, the Main Menu screen will appear on the screen. The Main Menu allows you to select from various setup functions and exit choices. WMP-248/249 User’s manual...
  • Page 33 This section provides information on the BIOS information, and Battery information System Date Set the system date. Use the <Tab> key to switch between data elements. System Time Set the system time. Use the <Tab> key to switch between time elements. WMP-248/249 User’s manual...
  • Page 34 Wake system with Dynamic Time Enables or disables system wake on alarm event. When enabled, the system will wake on the current time+Increase minute(s). Trusted Computing Security Device support Enables or disables BIOS support for security device. WMP-248/249 User’s manual...
  • Page 35 Software Feature Mask Configuration RAID OROM/RST driver will refer to the SWFM configuration to enable or disable the storage features. Info Report Configuration System configuration information report. It includes Post report/Error message report/Summary report USB Configuration WMP-248/249 User’s manual...
  • Page 36 Set Parameters of Serial Port 5. Serial Port 6 Configuration Set Parameters of Serial Port 6. Intel(R) Smart Connect Technology ISCT Support Enable/Disable Intel Smart Connect ISCT Notification Control Enable/Disable ISCT notification control ISCT WLAN Power Control Enable/Disable ISCT power control WMP-248/249 User’s manual...
  • Page 37 Number of minutes to keep lock status. 0 means lock always.1~100 minutes mean lock hold time. Power key Vol+/- key Backlight+/- key Reading light key Display switch key LCD backlight key Lock key Fn key Enable/Disable relative key function WMP-248/249 User’s manual...
  • Page 38 Chipset System Agent (SA)/PCH-IO Configuration This screen provides information on System Agent and PCH parameters. PCH-IO Configuration PCH parameters WMP-248/249 User’s manual...
  • Page 39 Disabled displays normal POST message. Hard Drive BBS Priorities Set the order of the legacy devices in this group CSM16 Parameters Enable/Disable option ROM execution settings, etc. CSM parameters Option ROM execution, boot options filter, etc. WMP-248/249 User’s manual...
  • Page 40 Security Enables or disables the security chip. It is recommended that you use this function with the Administrator/User password. WMP-248/249 User’s manual...
  • Page 41 Save the changes done so far as User Defaults. Restore User Defaults Restore the User Defaults to all the setup options. Launch EFI Shell From filesystem device Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices. WMP-248/249 User’s manual...

  • Page 42: Appendix

    A. Jumper settings and Connectors This appendix gives the definitions and shows the positions of jumpers, headers and connectors. All of the configuration jumpers on WMP-248/249 are in the proper position. Note: Some of jumpers or connectors will be removed base on system configuration.
  • Page 43 +1.35VS OPEN (default) +1.5VS JP9 –Touch Panel Type Selection Description Jumper Setting 3M type 1-2, 3-4 (default) ELO type 5-6,7-8 JP10 –SATA or SATA DOM Selection Description Jumper Setting SATA DOM 1-2 ---power +5V SATA 2-3(default)--- GND WMP-248/249 User’s manual...
  • Page 44 APPENDIX JP11 – RS-232 TTL Voltage Description Jumper Setting +5VS 2-3(default) +12VS WMP-248/249 User’s manual...
  • Page 45 PJ5 – HDD Power Connector Pin # Signal Description BATT+ BATT+ BATT+ BATT_T BATT_CLK BATT_DAT BATT_EN# Ground Ground Ground PJ6 /PJ7 – HDD Power Connector Pin # Signal Description +12VS Ground Ground +5VS JP8 – Power Jack Connector WMP-248/249 User’s manual...
  • Page 46 APPENDIX Pin # Signal Description DC In DC In Ground Ground Ground WMP-248/249 User’s manual...
  • Page 47 APPENDIX J5 – CFast Interface Pin # Signal Description KEEP KEEP KEEP KEEP KEEP KEEP KEEP IFDET WMP-248/249 User’s manual...
  • Page 48 J6 – LCD Inverter Interface Pin # Signal Description +12VSB +12VSB Backlight Adjust Backlight Enable Ground Ground J7 – SDP (EC Simple Debug Port) Pin # Signal Description P80_DAT P80_CLK Ground J8 – PCI POWER Pin # Signal Description Ground WMP-248/249 User’s manual...
  • Page 49 J9,J18 – PWM CPU FAN, SYSTEM FAN Signal Description Pin # J9(CPU) J18(SYSTEM) CPU PWM SYS PWM CPU RPM SYS RPM VCPUFAN VSYSFAN J10 – PWM CPU FAN Signal Description Pin # J10(CPU) 2.54mm VCPUFAN CPU RPM CPU PWM J11 – EC Reset WMP-248/249 User’s manual...
  • Page 50 J12 H5.2 Near External Symbol Symbo Symbol VREFDQ DQ27 DQS4 CKE0 DQ34 DQ35 DQ40 DQ41 DQ42 DQ43 DQS1# DQ48 DQS1 DQ49 DQ10 DQS6# DQ11 CK0# DQS6 DQ16 DQ50 DQ17 DQ51 DQS2# DQ56 DQS2 CAS# DQ57 DQ18 DQ19 DQ58 DQ24 DQ59 WMP-248/249 User’s manual...
  • Page 51 DQ46 DQ13 DQ47 DQ52 RESET# DQ53 DQ14 DQ15 CK1# DQ54 DQ20 DQ55 DQ21 RAS# DQ60 DQ61 ODT0 DQ22 DQS7# DQ23 DQS7 DQ28 DQ62 DQ29 VREF DQ63 DQ3# DQ36 EVENT# DQ37 DQ30 J13 – mini PCI Express Socket(HALF) WMP-248/249 User’s manual...
  • Page 52 +1.5VS CLKREQ# Reserved Reserved REFCLK- Reserved REFCLK+ Reserved Reserved Reserved Reserved Reserved PERST# PERn0 +3.3VSB PERp0 +1.5VS SMB_CLK PETn0 SMB_DATA PETp0 USB_D- USB_D+ +3.3VSB +3.3VSB Reserved Reserved CL_CLK Reserved CL_ DATA +1.5VS Controller Link RST# Reserved +3.3VSB WMP-248/249 User’s manual...
  • Page 53 LR(X-) LL(Y-) LL(Y-) LL(Y-) X+_DRIVE Y+_DRIVE X-_DRIVE Y-_DRIVE J16 – Battery Socket Pin # Signal Description RTC +3.3V J17 – EC JTAG Pin # Signal Description Pin # Signal Description EC_TRST# +3.3VSB EC_TMS EC_RDY# EC_TDI EC_TCK EC_TDO WMP-248/249 User’s manual...
  • Page 54 +5VSB Data - Data + Ground Ground J25–Internal USB 5V Interface. Support EC control Disable/Enable USB Function Pin # Signal Description +5VSB +5VSB Data - Data + Ground Ground J21 – mini PCI Express / mSATA Socket WMP-248/249 User’s manual...
  • Page 55 CLKREQ# Reserved Reserved REFCLK- Reserved REFCLK+ Reserved Reserved Reserved Reserved Reserved PERST# PERp0 +3.3VSB PERn0 +1.5VS SMB_CLK PETn0 SMB_DATA PETp0 USB_D- USB_D+ +3.3VSB +3.3VSB Reserved SEL_PCIE_SATA Reserved CL_CLK Reserved CL_ DATA +1.5VS Controller Link RST# Reserved +3.3VSB WMP-248/249 User’s manual...
  • Page 56 Ground A_RxIn0- B_RxIn0- A_RxIn0+ B_RxIn0+ Ground Ground A_RxIn1- B_RxIn1- A_RxIn1+ B_RxIn1+ Ground Ground A_RxIn2- B_RxIn2- A_RxIn2+ B_RxIn2+ Ground Ground A_CKIN- B_CKIN- A_CKIN+ B_CKIN+ Ground Ground A_RxIn3- B_RxIn3- A_RxIn3+ B_RxIn3+ Ground Ground Ground Ground J23 –TPM / ID-394 WMP-248/249 User’s manual...
  • Page 57 +3.3VSB J24 – POWER & HDD LED Pin # Signal Description SATA LED# +3.3VSB +3.3VSB Power LED# J28 – CAP Front Bezel Button Connector Pin # Signal Description +5VSB +3.3VSB KP_SCL KP_SDA PWR_LED# Programmable_LED SATA_LED# Ground Ground WMP-248/249 User’s manual...
  • Page 58 J29 – Standard SATA Interface Pin # Signal Description Ground Ground Ground J30 – Standard SATA / SATA DOM Interface Pin # Signal Description Ground Ground Ground / +5V J31 –BIOS SOCKET Pin # Signal Description Pin # Signal Description HOLD# WMP-248/249 User’s manual...
  • Page 59 SERIRQ USB_OC#67 PCIE_WAKE# LANCLK2_100MP Ground Ground Ground Ground UARTCLK2_48M USBPP6 Ground Ground J33,J37,J38,J39 – COM4, COM3, COM2, COM1 Serial Port Pin # Signal Description Pin # Signal Description 232_DCD# 232_DSR# 232_SIN 232_RTS# 232_SOUT 232_CTS# 232_DTR# 232_RI# +5VS WMP-248/249 User’s manual...
  • Page 60 Pin # Signal Description DCD# DSR# RTS# SOUT CTS# DTR# +5VS/+12VS J35 – Power Switch connect Pin # Signal Description Power ON J36,J43 – Reading Light Pin # Signal Description +12VSB READING LIGHT J40,J41 – Speaker Connect WMP-248/249 User’s manual...
  • Page 61 J42 – Internal MIC Pin # Signal Description Signal AGND J44,J45 – DisplayPort Interface Pin # Signal Description Pin # Signal Description ML_LANE0+ ML_LANE3- ML_LANE0- CONFI G1 ML_LAN1+ CONGI G2 AUX_CH+ ML_LAN1- ML_LANE2+ AUX_CH- HOT PLUG ML_LANE2- RETURN ML_LANE3+ +3.3VS WMP-248/249 User’s manual...
  • Page 62 J46 – Ethernet Port Pin # Signal Description Data0+ Data0- Data1+ Data2+ Data2- Data1- Data3+ Data3- J47,J48 – USB3.0 Port Pin # Signal Description Pin # Signal Description Data1- Data2- Data1+ Data2+ SSRX1- SSRX2- SSRX1+ SSRX2+ SSTX1- SSTX2- SSTX1+ SSTX2+ WMP-248/249 User’s manual...
  • Page 63 Line Out (stereo) Green J50 – VEDIO-IN Interface Pin # Signal Description Pin # Signal Description TMDS Data2- TMDS Data2+ TMDS Data1- TMDS Data1+ DVI_DET Hot Plug Detect TMDS Data0- TMDS Data0+ TMDS Clock+ TMDS Clock- J51 – Reset connector WMP-248/249 User’s manual...
  • Page 64 APPENDIX Pin # Signal Description SYS_RESET# J52 – Reset Button Pin # Signal Description SYS_RESET# WMP-248/249 User’s manual...

  • Page 65: L Type Stand (Optional Kit)

    Similar color as WMP series  10 degree tilt down and 30 degree tilt up solution  5,000 times hinge life cycle  Specifications: Weight Capacity: Max 10kgs Monitor Mounting Holes VESA 75*75mm or 100*100mm Application using Desktop stand WMP-248/249 User’s manual...

  • Page 66: Battery Pack Specifications (Optional Kit)

    Condition Discharge Protection UVP/OCP Charge Protection OVP/OTP Self-discharge Rate 10uA ~800 uA Dimensions 133 x 47 x 21mm Weight 220g+/-20g Ambient Temperature 0°C ~ +45°C Storage Temperature -20°C ~ +60°C Energy 28.08Wh Backup 100 W/ 10 min WMP-248/249 User’s manual...

  • Page 67: Scrap Computer Recycling

    For the computers that are no longer useful or work well, please contact with worldwide distributors for recycling. The worldwide distributors show on the following website: http://www.wincomm.com.tw/contact.aspx Note: Follow the national requirement to dispose unit WMP-248/249 User’s manual...

This manual is also suitable for:

Wmp-249

Table of Contents