Easily Solved Problems - Technogym IN DCKN2BB User Manual

5. Turning the screw clockwise moves the belt to the right, turning it anticlockwise moves it to the
left.
6. The belt alignment adjustment is performed slowly: turn the adjustment screw by ¼ of a turn
and then check the result before turning it again.
7. When you have completed the adjustment, stop the belt with the STOP button.
8. Close the flap (A).
The treadmill belt may only be adjusted by trained personnel or by the technical support
service due to the presence of moving components.

EASILY SOLVED PROBLEMS

The following table lists a series of problems that may occur during regular use of the product. If the
solutions indicated do not solve the problem, or if the problem is not listed, contact the technical
support service for help.
Problem
The treadmill does not switch
on.
Cause
The power cord is not plugged
into the wall socket.
Mains power failure.
15
Solution
Plug the power cord into the
wall socket.
Check the power supply at the
wall socket by plugging in an
appliance that definitely works.