Unpacking And Handling; Opening The Packaging - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions

Low voltage air circuit-breakers

Hide thumbs Also See for SACE Emax 2:

Table of Contents

3 - Unpacking and handling

NOTE: to unpack the circuit-breaker safely refer to the instruction sheet in the zipped packaging

pouch.

The following is the procedure for opening the packaging:

Cut the tape that seals the box. See Figure 5 e Figure 6.

Figure 5

Open the upper part of the packing box and remove the upper containment protection. See Figure 7

e Figure 8.

Figure 7

Figure 6

Figure 8

Continued on the next page

Emax E1.2 circuit-breakers | 3 - Unpacking and handling

ABB | SACE Emax 2

Table of Contents