ABB SACE Emax 2 Installation, Operation And Maintenance Instructions page 21

Low voltage air circuit-breakers

Hide thumbs Also See for SACE Emax 2:

Table of Contents

Continued from the previous page

Figure 34

Figure 35

Figure 36

Turn the crank clockwise until the pushbutton comes out and the indicator shows that the circuit-

breaker is in TEST position. See Figure 34.

Press the lock button and then rotate the crank clockwise until the button comes out and the indicator

shows that the circuit-breaker is in the CONNECT position. See Figure 35.

Extract the crank. See Figure 36.

Replace the crank in its housing See Figure 37.

Figure 37

Continued on the next page

Emax E1.2 circuit-breakers | 4 - Description

ABB | SACE Emax 2

Table of Contents