HTC / LTC: Terminal-covers Terminal-covers are applied in order to reduce the risk of direct contact with live parts. They are available in
PB: Phase separators The phase separators are applied in order to increase the insulation clearance between two adjacent phases.
84 | © 2014 ABB | 1SDH000999R0002 - L8569
two types:
• HTC - High terminal-covers
• LTC - Low terminal-covers
Information on assembly is available at the web site http://www.abb.com/abblibrary/DownloadCenter/, in
particular with the sheets kit:
•
1SDH000999R0612
for the high terminal-covers
•
1SDH000999R0613
for the low terminal-covers
Information on the assembly is available from the web site http://www.abb.com/abblibrary/DownloadCenter/,
in particular with the kit sheet 1SDH000999R0608.
Mechanical accessories | 1 - Mechanical Protection accessories
ABB | SACE Emax 2