Default Parameters; Ekip Dip Default Parameters - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions
Low voltage air circuit-breakers
Hide thumbs
Also See for SACE Emax 2:
Table of Contents
Advertisement
8 - Default parameters
Ekip DIP default parameters The Ekip Dip releases are supplied with the following default parameters, some adjustable with the front dip-
51 | © 2014 ABB | 1SDH000999R0002 - L8569
switch (protections, Frequency, Neutral), other via front bus.
Protection/Parameter
L
S
(1)
I
G
(1)
Frequency
Neutral
Hardware Trip
Measurement interval
Local Bus
Alive LED
(1)
Protection S available with LSI and LSIG versions of the release. Protection G available with LSIG version.
Value
1 In; 144 s
Off; 0.1 s
4 In
Off; 0.1 s
50 Hz (IEC) / 60 Hz (UL)
Off (for circuit breakers three-pole).
50 % (for four-pole circuit-breaker)
Disabled
5 minutes
Disabled
Disabled (Power LED on fixed)
Ekip Dip protection release | 8 - Default parameters
ABB | SACE Emax 2
Advertisement
Table of Contents
