Warnings - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions

Warnings

Figure 2
The following warnings must be respected:
• READ THE INSTRUCTIONS CAREFULLY BEFORE TRYING TO INSTALL, OPERATE OR REPAIR
• Store these instructions along with other documents for instruction, maintenance and installation, drawings
• Keep these documents available during the installation, operation and maintenance of the appliance. The
• Install the circuit-breaker within the limits of the project described in the instruction manual shipped with the
• Follow the safety procedures indicated by Your Company.
• Do not open any covers or doors, do not work on devices before removing power from all circuits, and
• detailed descriptions of standard procedures for installation, use, maintenance and principles for safe
• these warnings and alarms do not include all conceivable ways to make installation, use and maintenance
• anyone using maintenance procedures or devices, recommended by ABB or not, must check thoroughly
• This manual is written for qualified personnel only and is not intended as a substitute for a proper course,
• for the products equipped with communication, the purchaser, the installer or the final customer is responsible
• the purchaser, installer or end user is responsible for ensuring that notices and safety signs are posted and
• all the information contained in this document reflects the latest product information available at the time
5 | © 2014 ABB | 1SDH000999R0002 - L8569
THE CIRCUIT BREAKER.
and descriptive notes on the circuit-breaker.
use of these instructions facilitates proper maintenance.
unit. These circuit-breakers are designed to operate with values of voltage and current within the limits of
plate ratings. Do not install this equipment in systems operating at nominal values exceeding these limits.
after making sure of that with a measuring instrument.
WARNING!
operation are not included. It is important to note that this document contains safety and precaution
instructions, against certain methods (of installation, use and maintenance) that could cause harm to
personnel, damage devices, or make them unsafe.
recommended by ABB or not, that may be made, or possible consequences and complications of each
conceivable way, nor shall ABB investigate all those ways.
that neither personal safety nor the safety devices are endangered by mode of installation, use, maintenance
or the instruments used. For more information, questions or specific problems contact your nearest ABB
representative.
or experience about safety procedures for this device.
for applying all the IT security measures necessary in order to prevent risks deriving from connection to
communication networks; such risks include, among other things, the use of the product by unauthorized
persons, alteration of its normal functionality, accessing and modifying the information.
that all access points and switching devices are locked securely when the switchgear is left unattended,
even momentarily.
of printing. We reserve the right to edit the document at any time and without notice
HAZARD
ACCIDENTAL CONTACT WITH LIVE
POINTS CAN CAUSE SHOCK, BURNS AND
RESULT IN DEATH.
Do not try to use the product in any way, before
having read this instruction manual
ABB | SACE Emax 2
Emax E1.2 circuit-breakers | 1 - Contents