Standard Output Relay Board; Figure 21: Standard Output Relay Board - 8 Contacts - GE P642 Technical Manual

P64x
Terminal Number
Terminal 17
Terminal 18
6.6

STANDARD OUTPUT RELAY BOARD

Figure 21: Standard output relay board - 8 contacts

This output relay board has 8 relays with 6 Normally Open contacts and 2 Changeover contacts.
The output relay board is provided together with the power supply board as a complete assembly, or
independently for the purposes of relay output expansion.
There are two cut-out locations in the board. These can be removed to allow power supply components to
protrude when coupling the output relay board to the power supply board. If the output relay board is to be used
independently, these cut-out locations remain intact.
The terminal numbers are as follows:
Terminal Number
Terminal 1
Terminal 2
Terminal 3
Terminal 4
Terminal 5
Terminal 6
Terminal 7
Terminal 8
Terminal 9
Terminal 10
P64x-TM-EN-1.3
Common
Common
Relay 1 NO
Relay 1 NO
Relay 2 NO
Relay 2 NO
Relay 3 NO
Relay 3 NO
Relay 4 NO
Relay 4 NO
Relay 5 NO
Relay 5 NO
Chapter 3 - Hardware Design
Opto-input
Output Relay
51