VESTEL Smart NFY 600 X User Manual page 56

PROBLEM
Your refrigerator
does not cool eno-
ugh.
PROBLEM
Appliance is not
operating.
CAUSE
Doors of your appliance may be ope-
ned and left as such for longer time.
Doors of the appliance may not be
completely closed.
A container or food preventing pro-
per ventilation may be placed at the
back of the refrigerator.
Your appliance may be overfilled.
There may not be sufficient distance
between your appliance and the wall.
Operating ambient temperature may
not be suitable for your product's
standards.
CAUSE
There may be a power failure.
Power plug may not be properly
connected.
Check if the fuse of the socket to
which the plug is connected or the
main fuse is blown.
Ambient temperature is too low.
There might be a problem with the
power outlet.
Freezer compartment may be in
automatic defrosting process.
Compressor may not work when it
is first started as a protection.
SOLUTION
Do not frequently open and close
the doors. Especially in this case, do
not open and close the doors for a
couple of hours.
Check if the refrigerator's top is ben-
ded 10-15 mm back as to enable the
doors close themselves and check also
that the food stored inside does not
contact the door.
Be careful on this point when placing
food inside the refrigerator.
You need to take overload out from
the refrigerator.
Ensure that the necessary distance is
left as instructed in the Safety Infor-
mation for Installing the Appliance.
Ensure that operating ambient tem-
perature is within the limits specified
in the user manual.
SOLUTION
Contact with an expert electric tech-
nician.
Plug it firmly to the outlet.
Make sure that the fuse is operational.
Set the compartment temperature to
a lower level.
To check this, plug your refrigerator
to a socket which is surely operating
and try again.
It will get back to normal after the
defrosting process. This is normal.
It will get back to normal after a while
the appliance is switched on. This is
normal.
23