General Appearance - VESTEL Smart NFY 600 X User Manual

Required tools:
Phillips screws
• Attach the handle to the door
and tighten two screws with a
screwdriver after ensuring that
holes of the handles are firmly
attached to the door. (1)
• Ensure that front side of the
handle is in alignment with the
top handle grip and ensure that
top and bottom handle grip na-
ils match each other. Otherwise
nails may be broken. (2)
• Ensure that nails fit together by
applying force. (3)
• NOTE: It may be easier to
perform assembly from bottom
to up. Assembly of lower handle
will be the same for the upper
handle.
• After successfully installing the
appliance you need to clean it
thoroughly before use. You may
find detailed information on
cleaning in the "Cleaning and
Maintenance" section.
Phillips screwdriver
1
3
2
2
3
1
After attaching, handle will look
like as in the following.
J

General Appearance

J
This visual is intended for providing in-
formation about the components of the
appliance only.
Components may differ depending on the
appliance model.
Illustrations are representative.
11
1
2
2
1 3