Download Print this page

Advertisement

Quick Links

WHITE GOODS
Cooler Set Button
The cooler set button allows changes to be made to the temperature of the cooler compartment.
Super cool and eco mode can also be activated using this button.
Freezer Set Button
The freezer set button allows changes to be made to the temperature of the freezer compartment.
Super freezer and eco mode can also be activated using this button.
Sr Alarm
Sr alarm will change to red if any problems occur.
NF COMBI – 653 ELECTRONIC - RIGA
Display and control panel
1. It is super freeze indicator.
2. It is freezer set value screen.
3. It enables the setting value of freezer to be
modified and super freeze mode to be activated
if desired. Freezer may be set to -16, eco, -20, -
22, -24 °C and Super freeze.
4. It is super cooling indicator.
5. It is cooler set value screen.
6. It enables the setting value of cooler to be
modified and super cool mode to be activated if
desired. Cooler maybe set to 8, 6, eco, 4, 2 °C
and super cool.
7. Sr alarm indicator.
CUSTOMER
SUPPORT
MARCH 2021

Advertisement

loading
Need help?

Need help?

Do you have a question about the NF COMBI and is the answer not in the manual?

Questions and answers

Summary of Contents for VESTEL NF COMBI

  • Page 1 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Display and control panel WHITE GOODS 1. It is super freeze indicator. 2. It is freezer set value screen. 3. It enables the setting value of freezer to be modified and super freeze mode to be activated if desired.
  • Page 2: Control Panel

    NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Control Panel WHITE GOODS Operating Your Fridge Freezer Super Cool Mode When would it be used? • To cooling huge quantities of food. • To cooling fast food. • To cooling food quickly.
  • Page 3 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Control Panel WHITE GOODS Screen Saver Mode Purpose This mode saves energy by switching off all control panel lighting when the panel is left inactive. How to Use • Screen saver mode will be activated automatically after 30 seconds.
  • Page 4 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Air Flow Diagram WHITE GOODS Cold Air Returning warm air MARCH 2021...
  • Page 5 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Refrigerant Cycle Diagram WHITE GOODS PIPE EVAPORATOR COMPRESSOR CONDANSER CERPANTINE MARCH 2021...
  • Page 6 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Special Programs WHITE GOODS When you first start the appliance If the freezer and defrost sensors are warmer than –5ºC, then the automatic test starts. The below listed components will be tested respectively with 5 second intervals.
  • Page 7 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Service Mode WHITE GOODS Entering service mode : • Select «8» set value then press the cooler set button 10 seconds. • If there is a faulty situation, error code will be observed on screen. Otherwise nothing will be on the screen.
  • Page 8 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT User and Service Mode Error Message WHITE GOODS To cancel Service Mode : You can use same method as entering the Service Mode. DEFECT TYPE SERVICE MODE REACTION FREEZER SENSOR OPEN/SHORT CIRCUIT...
  • Page 9 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Changing The Door Swing Direction to Right Hand WHITE GOODS 1. Hold the top hinge cover and 2. Disconnect the display connector. remove it toward that direction (Pic-1) Unscrew the screws fixing the top hinge and remove it.
  • Page 10 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Changing The Door Swing Direction to Right Hand WHITE GOODS 5. Displace the bottom door. (Pic-5) Picture-5 6. Unscrew the adjustable foot (Pic-6) 7. Unscrew the bottom hinge screws. (Pic-7) Picture-6...
  • Page 11 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Changing The Door Swing Direction to Right Hand WHITE GOODS 9. Screw the bottom hinge to the left bottom 8. Unscrew the bottom hinge pin and side of refrigerator. Screw the adjustable screw it to other hole.
  • Page 12 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Changing The Door Swing Direction to Right Hand WHITE GOODS 11. Replace the top bushing and the top bushing cap at the bottom door. (Pic-11) Picture-11 12. Remove the support plastic under the upper door.
  • Page 13 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Changing The Door Swing Direction to Right Hand WHITE GOODS 14. Place the bottom door (Pic-14.1) and rotate the middle hinge by 180º. After that, Screw to the right side on the middle sheet. (Pic-14.2) Picture-14.1...
  • Page 14 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Changing The Door Swing Direction to Right Hand WHITE GOODS 16. Place the top door to the middle hinge and then connect the display connector and screw the top hinge to the top panel. (Pic-16.1 / Pic-16.2) Picture-16.2...
  • Page 15 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Removing/Assembling Display WHITE GOODS CAUTION: The plug must be pulled out before the display is removed. 1. Display can be removed with the disassembly tool. Do not use any sharp objects to remove the display.
  • Page 16 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Replacement of Mainboard WHITE GOODS CAUTION: The plug must be pulled out before the mainboard group is removed. 1. Unscrew the screws which are fixing the main board cover. (Pic-1) Picture-1 2.
  • Page 17 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Replacement of Refrigerator Multiflow WHITE GOODS 1- First remove the glass shelves and chiller shelf (Pic-1) Picture-1 2- Remove refrigerator multi-flow caps and 3- Flex the multi flow by holding the unscrew the screws.
  • Page 18 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Removing The Cooler Multi Flow Fan Motor WHITE GOODS 1.Remove the fan cover by flexing the fan cover detail and then remove the fan motor by flexing the fan motor rubbers. (Pic-1/ Pic-2/Pic-3)
  • Page 19 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Replacement of Refrigerator Sensor WHITE GOODS Remove the freezer sensor cover by pulling forward (Pic-1) and disconnect sensor connector. (Pic-2) Picture-1 Picture-2 CAUTION: Pay attention not to damage to the sensor cover details!
  • Page 20 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Replacement of Freezer Multiflow Cover WHITE GOODS 1. Remove the freezer baskets (Fig-1.1) freezer glass shelfs (Pic-1.2) unscrew the rails (Pic-1.3) Rail-1 Rail-2 Picture-1.1 Picture-1.2 Picture-1.3 2. Remove caps and unscrew the screws 3.
  • Page 21 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Replacement of Fin Evaporator Assy WHITE GOODS 1. Disconnect to evaporator connector. 2. Remove the evaporator by pulling forward in a (blue connector) (Pic-1) horizantal dicretion. (Pic-2) Fin Evap connector Picture-1 Picture-2 Do not push it up or down.
  • Page 22: Customer Support

    NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Removing The Evaporating Tray and WHITE GOODS The Bottom Cab Fan Motor 1. Unscrew the bottom tray screws and displace it from the compressor basement. After that, remove the fan motor connector. (Pic-1) 2.
  • Page 23 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Removing/Assembling The Reed Switch WHITE GOODS Under the Cabinet Under the Upper Door Take the reed switch out of its place with a screwdriver. Then Disconnect the connectors of the Switch and remove it.
  • Page 24 NF COMBI – 653 ELECTRONIC - RIGA CUSTOMER SUPPORT Barcode and Serial Number Explanation: WHITE GOODS Vestel refrigerator serial numbers are consist of 22 digits. DOOR COUNTRY DESIGN BRAND ENERGY CLASS VESTEL MODEL MONTH YEAR SERIAL NUMBER Cabinet Packaging Type...