AEG BY931460IM User Manual page 19

Activating the programme
1. Activate the appliance.
2. Select the menu: Favourites.
3. Press
4. Select your favourite programme
name.
5. Press
10.2 Using the Child Lock
The Child Lock prevents an accidental
operation of the appliance.
1. Activate the appliance.
2. Touch
until the display shows a message.
To deactivate the Child Lock function
repeat step 2.
10.3 Function Lock
This function prevents an accidental
change of the heating function. You can
activate it only when the appliance
operates.
1. Activate the appliance.
2. Set a heating function or setting.
3. Press
display shows: Function Lock.
4. Press
To deactivate the function, press
display shows a message. Press
and then
EURO Appliances - euappliances.info
to confirm.
to confirm.
You can activate the Child
Lock only when the Auto
Cooking function is on.
If the Pyrolysis function
operates, the door locks
automatically.
A message comes on in the
display when you touch a
sensor field.
and at the same time
again and again until the
to confirm.
If the Pyrolysis function
operates, the door is locked
and the symbol of a key
comes on in the display.
to confirm.
When you deactivate the
appliance, the function also
deactivates.
10.4 Set + Go
The function lets you set a heating
function (or a programme) and use it
later with one press of any symbol.
1. Activate the appliance.
2. Set a heating function.
3. Press
display shows: Duration.
4. Set the time.
5. Press
display shows: Set + Go.
6. Press
Press any symbol (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
• Function Lock is on when
• The menu: Basic Settings
10.5 Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some
time if a heating function operates and
you do not change any settings.
Temperature (°C)
30 - 115
120 - 195
200 - 245
250 - maximum
The Automatic switch-off
does not work with the
functions: Light, core
. The
temperature sensor, End
again Time, Duration.
10.6 Brightness of the display
There are two modes of display
brightness:
ENGLISH
again and again until the
again and again until the
to confirm.
) to start
the heating function
operates.
lets you activate and
deactivate the function:
Set + Go.
Switch-off time (h)
12.5
8.5
5.5
1.5
19