MOTO GUZZI V9 Roamer Service Station Manual page 46

Maintenance
pos. Description
5 Washers fixing countersunk head
screws
6 Plate fixing torx screw
Replacement
NOTE
HOT OIL IS MORE FLUID AND WILL DRAIN OUT MORE EASILY AND COMPLETELY.
•
Place a container with suitable capaci-
ty under the drainage plug (2).
•
Unscrew and remove the drainage
plug (2).
•
Unscrew and remove the filler plug (1).
•
Drain the oil into the container; allow
several minutes for oil to drain out com-
pletely.
•
Check and if necessary, replace the
sealing washers of drainage plug (2).
•
Remove any metal scrap attached to
the drainage plug (2) magnet.
•
Remove the air filter (3) and clean it
•
Check the O-Ring (4) and if necessary
replace it
•
Screw and tighten the drainage plug
(2)
•
Pour in new oil, observing the quantity indicated in the table "capacity"
•
Tighten the filler cap (1).
CAUTION
DO NOT ADD ADDITIVES OR OTHER SUBSTANCES TO THE FLUID. WHEN USING A FUNNEL
OR ANY OTHER ELEMENT, MAKE SURE IT IS PERFECTLY CLEAN.
MAIN - 46
Type Quantity
M6x12 5 9-11 Nm (6.64-8.11 lbf
M5x16 1 6-7 Nm (4.42-5.16 lb ft)
V9 Roamer - V9 Bobber
Torque Notes
Loct. DRI 2045
ft)
Loct. DRI 2045