MOTO GUZZI V9 Roamer Service Station Manual page 44

Maintenance
•
Top-up with engine oil until it goes above the minimum level marked "MIN".
CAUTION
DO NOT ADD ADDITIVES OR OTHER SUBSTANCES TO
THE FLUID. WHEN USING A FUNNEL OR ANY OTHER EL-
EMENT, MAKE SURE IT IS PERFECTLY CLEAN.
Replacement
•
Place a container with 2000 cm³
(122.05 cu.in) capacity under the
drainage plugs (1).
•
Unscrew and remove the drainage
plugs (1).
•
Unscrew and remove the filler plug (2).
•
Drain the oil into the container; allow
several minutes for oil to drain out com-
pletely.
•
Check and, if necessary, replace the
sealing washers of drainage plugs (1).
•
Remove any metal scrap attached to
the magnet of drainage plugs (1).
•
Screw and tighten the drainage plugs
(1).
Tightening torque for drainage plugs (1): 12
Nm (8.85 lb ft).
DO NOT DISPOSE OF OIL INTO THE ENVIRONMENT.
DISPOSE OF ENGINE OIL IN A SEALED CONTAINER AND
TAKE IT TO YOUR SUPPLIER OR TO THE NEAREST USED
OIL COLLECTION CENTRE.
MAIN - 44
V9 Roamer - V9 Bobber