MOTO GUZZI V9 Roamer Service Station Manual page 125

V9 Roamer - V9 Bobber
Rimozione
•
Remove the screw fixing the right-hand
rear right shock absorber and pull it
from the pin on the drive shaft
•
Remove the screw fixing the left-hand
rear shock absorber and remove it
from the pin
•
Using a jack, lift the rear of the motor-
cycle.
•
Unscrew the rear fixing screw of the
rear brake calliper support
•
Unscrew the wheel axle nut, making
sure to take the washer from the left
side and pull the pin itself from the right
side.
Chassis
CHAS - 125