MOTO GUZZI V9 Roamer Service Station Manual page 185

V9 Roamer - V9 Bobber
•
Remove the clamp present in the col-
lector that blocks the filter case to the
throttle body
•
Remove the two bottom fastening nuts
of the splash guard
•
Operating on the left side of the motorcycle, remove the blow-by pipe (6) from the filter case,
while the right side, remove the secondary air pipe (7)
•
Remove the four screws securing the
filter case support bracket and remove
it by slightly raising the box itself
Bodywork
BODYW - 185