V9 Roamer - V9 Bobber
•
Remove the tone wheel (2)
•
Remove the brake disc (3)
DURING REFITTING, APPLY LOCTITE 243 ON THE
THREAD OF THE BRAKE DISC SCREWS (1).
CAUTION
DURING REFITTING, SCREW ALL THE SCREWS (1) MAN-
UALLY AND TIGHTEN THEM OPERATING DIAGONALLY
FOLLOWING THIS SEQUENCE: A-B-C-D-E-F.
Disc Inspection
CAUTION
THE FRONT BRAKE DISC SHAPE DOES NOT CHANGE THE OPERATING AND MAINTENANCE
SPECIFICATIONS OF THE SYSTEM.
•
The following operations must be car-
ried out with the brake discs fitted on
the wheel; they refer to a single disc,
but are valid for both.
•
Check the disc for wear by measuring
the minimum thickness with a micro-
meter in different points. If the mini-
mum thickness, even in a single point
Braking system
BRAK SYS - 171