Chassis
Assembling
•
Insert the new O-ring in the pinion unit,
or use the one removed during the dis-
mantling phase if it is intact and un-
damaged
•
Insert the seal ring until it stops
•
Insert the spacer closing bearings pay-
ing attention that the manufactured
part is facing the O-ring so as not to
damage it
•
Using the special tool, lock in the vice,
screw the fastening nut and lock nut of
the pinion case bearing to torque.
Specific tooling
021000Y Bevel gear pair support
CHAS - 140
V9 Roamer - V9 Bobber