Table of Contents
Advertisement
6.2 STATUS
The StNum number is obtained from the indicated remote device and is incremented whenever a change of state of at
least one DNA or UserSt bit occurs. The SqNum number is obtained from the indicated remote device and is incremented
whenever a GSSE message is sent. This number will rollover to zero when a count of 4 294 967 295 is incremented.
PATH: ACTUAL VALUES
DIGITAL COUNTERS
Counter 1
The present status of the eight digital counters is shown here. The status of each counter, with the user-defined counter
name, includes the accumulated and frozen counts (the count units label will also appear). Also included, is the date and
time stamp for the frozen count. The
PATH: ACTUAL VALUES
SELECTOR SWITCHES
6
The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.
PATH: ACTUAL VALUES
FLEX STATES
There are 256 FlexState bits available. The second line value indicates the state of the given FlexState bit.
6-6
STATUS
DIGITAL COUNTERS
Counter 1
Counter 1
MESSAGE
Counter 1
MESSAGE
YYYY/MM/DD HH:MM:SS
Counter 1
MESSAGE
COUNTER 1 MICROS
STATUS
SELECTOR SWITCHES
SELECTOR SWITCH 1
POSITION: 0/7
SELECTOR SWITCH 2
MESSAGE
POSITION: 0/7
STATUS
FLEX STATES
PARAM
1: Off
Off
PARAM
2: Off
MESSAGE
Off
PARAM 256: Off
MESSAGE
Off
F35 Multiple Feeder Protection System
DIGITAL COUNTERS Counter 1(8)
ACCUM:
0
FROZEN:
0
FROZEN:
MICROS:
0
value refers to the microsecond portion of the time stamp.
Range: Current Position / 7
Range: Current Position / 7
Range: Off, On
Range: Off, On
↓
Range: Off, On
6 ACTUAL VALUES
6.2.9 DIGITAL COUNTERS
6.2.10 SELECTOR SWITCHES
6.2.11 FLEX STATES
GE Multilin
Advertisement
Table of Contents
