Preparation; Connecting The Nebuliser - Pari mini Instructions For Use Manual

– Do not operate the compressor in areas where there is a risk
of explosion or in the presence of oxidising gases (e.g.,
oxygen, nitrous oxide, flammable anaesthetics).

3.2 Preparation

Check the compressor housing and the power adapter for
Check the compressor housing ... 3
damage every time before using. Make sure that the local supply
voltage complies with the voltage data marked on the power
adapter identification label. Only use the compressor if all
components are intact. The compressor must not be operated if
the device or the power adapter is damaged, or if damage is
suspected (e.g., after it has fallen or if there is a smell of burning
plastic).

Connecting the nebuliser

• Assemble the nebuliser as described in the instructions for use
of the nebuliser.
• Insert the nebuliser in the holder on
the compressor intended for this
purpose.
• Connect the connection tubing to the
nebuliser and the compressor.
Info: The tube connectors can be
inserted more easily if they are twisted
slightly when inserting.
- 34 -