Troubleshooting - Pari mini Instructions For Use Manual

5 TROUBLESHOOTING

In the event of faults that are not listed in this chapter, or if the
In the event of faults that ...
suggested procedure does not correct the fault, contact the
PARI GmbH Service Center [See also: 7.4 Contact].
Fault table ...
Fault
The compressor
does not start
up.
No medication
is coming out of
the nebuliser.
- 40 -
Possible cause
The power adapter
cable is not plugged into
the device properly.
The power adapter is
not plugged into the
mains socket properly.
The nebuliser nozzle is
blocked.
The connection tubing
is not connected
properly.
The connection tubing
is leaking.
Procedure
Check that the power
adapter cable is seated
correctly in the
compressor power cord
socket.
Check that the power
adapter is seated
correctly in the mains
socket.
Clean the nebuliser.
Check that both ends of
the tubing are seated
properly.
Replace the connection
tubing.