Patton electronics IM 1/I User Manual page 12

5.3 CONNECTION TO THE LINE INTERFACE MEDIA
Instructions for connecting the line interface media (twisted pair , or
fiber optic cable) are contained within the base unit user manual.
Please refer to the base unit manual for connection details.
Notice!
Any terminal cable connected to the Model IM1/I
must be shielded cable, and the outer shield must be 360
degree bonded–at both ends–to a metal or metalized backshell.
5.4 CONNECTING TO AC OR DC POWER
Instructions for connecting the power supply Universal Interface
AC Power Supply and DC Power Supply option) are contained within
the base unit user manual. Please refer to the base unit manual for
connection details.
WARNING!
specifically designed to work with UI and DC versions of
Patton Electronics base units. Use with 120/230VAC
versions could result in damage to the unit. If you are
unsure of your base unit power supply, please contact
Patton Electronics technical support at (301)975-1000 or at
support@patton.com.
The Model IM1/I interface card has been
11