IBM SAN768B-2 User Manual page 123

|
|
|
|
|
2011/05/24-11:09:27, [SULB-1044], 7262, SLOT 7 | CHASSIS, INFO,
SAN768B-2,
Firmwaredownload to secondary partition has completed
successfully.
SAN768B-2:admin>
3. To download firmware through the IBM site,
a. Go to the IBM Support Portal, http://www.ibm.com/supportportal
b. Search for your product machine type (2499) or product name
c. On the displayed page, in the Downloads section, click Downloads
(drivers, firmware, PTFs).
d. From the displayed results page (Fix Central), select the appropriate release
notes link and read the release notes prior to downloading and installing
the firmware update.
e. Click the link for Release 7 firmware, click Continue on the displayed page
to navigate to the Brocade Downloads for IBM End Users page.
f. Follow the instructions on the Brocade pages. Enter all requested
information (use default values).
4. When the download process finishes, run firmwareDownloadStatus to verify
that the firmware has been updated. The command displays a running account
of the progress of the firmwareDownload command (if it is still running) until
the command has completed. The final message is similar to the following and
will appear with a date and time stamp:
Slot 6 (CP0, active): Firmwaredownload command has completed successfully. Use
firmwareshow to verify the firmware versions.
5. On the standby CP blade (the blade for which you just changed the firmware
level), run reboot . The reboot of the standby CP will initiate a firmwarecommit
to the secondary partition and log you out.
SAN768B-2:admin> reboot
Broadcast message from root (ttyS0) Fri Jun 18 14:49:45 2011...
The system is going down for reboot NOW !!
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
SAN768B-2:admin> HAMu
Heartbeat down, stop FSS
Unmounting all f##exiting due to signal: 9, pending signals:
0x20000, 0x0 filesystems.
Please stand by while rebooting the system...
Restarting system.
The system is coming up, please wait...
.
.
.
Fri Jun 18 14:53:13 2011: Doing firmwarecommit now.
Please wait ...
Fri Jun 18 14:55:27 2011: Firmware commit completes successfully.
Validating the filesystem ...
Fri Jun 18 22:36:05 2011: Doing firmwarecommit now.
Please wait ...
Fri Jun 18 22:36:48 2011: Firmware commit completes successfully.
2011/06/18-14:56:50, [SULB-1004], 908, SLOT 7 | CHASSIS, INFO,
SAN768B-2, Firmwarecommit has completed.
2011/06/18-14:56:50, [SULB-1036], 909, SLOT 7 | CHASSIS, INFO,
SAN768B-2, The new Version: Fabric OS v7.0.0a
2011/06/18-14:56:50, [SULB-1002], 910, SLOT 7 | CHASSIS, INFO,
SAN768B-2, Firmwaredownload command has completed successfully.
Note: The time stamp on the co-cpu may not be in sync with the main cpu on
the blade. This is not a cause for concern.
Chapter 5. Removing and installing components
95