Mitsubishi Electric Melsec FX Series Beginners Manual page 71

Inverter Drive Control
Create the ladder program as shown below.
Once the ladder program is complete, click on Online from the top menu bar in GX Developer
and select Write to PLC. The "Write to PLC" window will appear.
Click the Param+Prog button and then click the Execute button. The parameters and the
created program will be transferred to the PLC. To enable the transferred parameters, stop the
PLC and then restart it.
Fig. 4-19: Write to PLC window
X000
X001
X002
X003
—
—
—
Tab. 4-20: Used inputs and outputs
FX Positioning Control Systems
Inputs
Reverse rotation limit
Forward rotation limit
Forward rotation command input
Reverse rotation command input
—
—
—
Learning to Use the FX Family for Positioning Control
Y000 Inverter running (RUN)
Y001 Forward rotation
Y002 Reverse rotation
Y003 Up to frequency (SU)
Y004 Overload is applied (OL)
Y006 Frequency detection (FU)
Y007 Alarm occurrence
423080da.e
Outputs
4 - 29