Mitsubishi Electric Melsec FX Series Beginners Manual page 56

Learning to Use the FX Family for Positioning Control
Click on the Positioning tab and then set Y000 (pulse output destination) as follows.
Fig. 4-11: "Positioning" window
Setting item
Bias speed [Hz]
Maximum speed [Hz]
Creep speed [Hz]
Zero return speed [Hz]
Acceleration time [ms]
Deceleration time [ms]
Interrupt input for DVIT instruction
Tab. 4-10: Settings for Y000
The "Bias speed" corresponds to the minimum speed.
Can only be set for a FX
4 - 14
Setting value
500
100,000
1000
50,000
100
100
X000
or FX main unit.
3U 3UC
MELSEC FX PLC positioning
4130a0da.eps
MITSUBISHI ELECTRIC