Special Settings And Information - ATTACK AWP 25 Instructions For Use Manual

Combined boiler

Hide thumbs Also See for AWP 25:

Table of Contents

9. SPECIAL SETTINGS AND INFORMATION

The following special settings can be made in the boiler ATTACK WOOD&PELLET (Pic. 37)

Pic. 37 The special settings are displayed after pressing the key sign.

Set Time, Set Date – it is possible to set the date and time. If the boiler is disconnected from the

electricity mains or the power supply fails, the date and time are in the memory for

approximately 3 days.

Screen saver – defines the time, when the screen saver is activated.

Program version – information about the actual program version

PLC Serial No. – the serial number of electronics

Alarms messages – enables the sound notification of errors and notifications of the boiler.

Automatic quit – if it comes to errors like a fail of ignition, flame loss or failure of the pellet feed,

they can be automatically erased and the boiler can be started again. This is possible only by

small errors. The problems like the damaged boiler temperature sensor or damaged flue gas

temperature sensor cannot be automatically erased. The time, after which will be the error

erased can be defined by the "after" parameter.

Table of Contents