5
Mounting / installation
Connecting FDOOT241-A3, FDOOT241-A4 to existing systems
70
Building Technologies
Fire Safety
Variant 2: The existing detector base is replaced
1. Use one of the FDB221, FDB221-AA or FDB222 detector bases.
2. Install the detector to replace DO1131A or SDF1200/2200 directly on the new
detector base.
3. Install an additional, standard resistor to replace another detector.
–
Use the table below to determine the resistor that corresponds to the
existing detector type.
–
Install the selected resistor.
–
Use the auxiliary terminal DBZ1190-AA for multiple assignment.
Variant 2: Resistor connection
Do not install a resistor.
R =
See also
Base adapter FDB241 [
Applicable documents [
77]
9]
007004_n_en_--
01.07.2012