Maintenanceinstructions - Whirlpool W10184585B Installation Instructions Manual

Commercial stacked dryer gas (120-volt, 60-hz) or electric (120/140-volt; 60-hz)
Table of Contents

Advertisement

Available languages

Available languages

MAINTENANCEINSTRUCTIONS
[]
Clean lint screen
before
and after each cycle.
[]
Removing
accumulated
lint:
From
inside the dryer
cabinet:
Lint should
be removed
every 2 years or more often,
depending
on dryer
usage. Cleaning
should
be done
by a qualified
person.
From the exhaust
vent:
Lint should
be removed
every 2 years, or more
often,
depending
on dryer
usage.
[]
Keep area around
dryer
clear and free from
combustible
materials,
gasoline,
and other
flammable
vapors
and
liquids.
[]
Keep dryer area clear and free from
items that would
obstruct
the flow
of combustion
and ventilation
air.
If dryer
does not operate,
check the following:
[]
Electrical
supply
is connected.
[]
Circuit
breaker
is not tripped
or house
fuse is
not blown.
[]
Door is closed.
[]
Controls
are set in a running
or "on"
position.
[]
Cycle has been
selected.
[]
For gas dryers,
check that gas supply
shut-off
valves are set
in open
position.
IF YOU NEED ASSISTANCE
Contact your authorized
Commercial Laundry distributor.
To locate your authorized
Commercial Laundry distributor,
or for web
inquiries, visit www.WhirlpoolCommercialLaundry.com.
If you cannot locate your distributor,
the Commercial Laundry Support Center will answer any questions about operating or
maintaining
your dryer not covered in the "Installation
Instructions."
Just dial 1-800 NO BELTS(1-800-662-3587)
-- the call is toll free.
When you call, you will need the dryer model number and serial number. Both numbers can be found on the serial-rating plate
located in the dryer door opening.
26

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W10184585B and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

W10184586b

Table of Contents