ELECTRIC DRYER ELECTRICAL CONNECTIONS
Connection
Options
Power Cord
4-wire receptacle (NEMA Type 14-30R)
3-wire receptacle (NEMA Type 10-30R)
Direct Wire
4-wire direct
3-wire direct
(127
Connecting
4-Wire
Connection:
Power Supply Cord
IMPORTANT: A 4-wire connection is required for mobile
homes and where local codes do not permit the use of 3-wire
connections.
Standard Power Supply Cord Connectors
Flangedspade connector
Ring Connector
Connecting Ground and Neutral Wires
1. Remove center terminal
block screw and the ground wire
by removing the external ground connector screw.
Connecting
Direct
Wire
Ground
3. Connect
ground
wire
(green
or bare) with
external
ground
connector
screw.
Connecting
Remaining Wires
4. Connect remaining wires with outer terminal
block screws.
e
2. Connect
ground
and neutral
wire to center
terminal
block.
19