Connecting Usb Devices - Pioneer TORAIZ SP-16 Operating Instructions Manual

2 DC IN terminal
Connect the DC plug of the included AC adapter.
! Connect the power cord after all the connections between
devices have been completed.
! Be sure to use the included power cord.
3 u switch
4 LINK terminal
Connect a PRO DJ LINK compatible device with the LAN cable
(included).
5 DIN MIDI IN and DIN MIDI OUT/THRU terminals
These are DIN type terminals. Connect another MIDI device.
6 USB-B terminal
Connects to a computer.
! A USB hub cannot be used.
! To maintain the performance, connect this unit and computer
directly using a USB cable compliant with USB 2.0.
7 INPUT terminals
Connect a DJ player or other line level output device. When
[L (MONO)] only is connected, the audio input to [L (MONO)] is also
input to the [R].
8 INPUT LEVEL control
9 OUT3-8/ASSIGNABLE OUT terminals
a OUT1-2/MASTER/ASSIGNABLE OUT terminals
b Kensington security slot
c PHONES terminals
Connect headphones here.
Supports a stereo phone plug (ø 6.3 mm).

Connecting USB devices

Connect the USB device to the USB device insertion slot.
Disconnecting USB devices
1 Press and hold the [USB STOP] button until the USB
indicator stops flashing.
Do not remove the USB device or turn Off the power of the unit while
the USB indicator is flashing. The management data in the unit may get
deleted. Also, the USB device may become unreadable.
USB STOP button
2 Disconnect the USB device.
6
En
USB indicator