Changing The Settings (Utility); Setting Preferences - Pioneer TORAIZ SP-16 Operating Instructions Manual

Changing the settings (UTILITY)

If you tap , the UTILITY screen appears so that you can configure vari-
ous settings of this unit.

Setting preferences

Options settings
GLOBAL SETTING
INFORMATIONS
!
*: Setting upon purchase
42
En
Setting ranges
TOUCH STRIP SETTING (USER1) -
TOUCH STRIP SETTING (USER2) -
PAD CURVE Hard 3 to Linear* to Soft 3
PAD THRESHOLD 1 to 16
PAD SENCITIVITY 1 to 16
PAD MODE SELECT RESPONSE IMMEDIATELY*, OVER 1sec.
PATTERN QUANTIZE
STEP, BAR, PATTERN*
INTERNAL w/USB MIDI OUT*, INTERNAL w/DIN
SYNC
MIDI OUT, USB MIDI, PRO DJ LINK
LCD BRIGHTNESS 1, 2, 3*, 4, 5
SCREEN SAVER OFF, ON*
AUTO STANDBY OFF, ON*
-
USB MASS STORAGE MODE
TOUCH PANEL CALIBRATION -
Default*, Chinese(simplified characters),
CHARACTER PRIORITY
Chinese(traditional characters), Korean
Version No. -
DISK SPACE -
1 Tap [ UTILITY].
The UTILITY screen appears.
! The UTILITY screen can be displayed with the [SHIFT] button
+ [HOME] button.
2 Turn the rotary selector to select the item you wish to
set.
The focus moves.
3 Press the rotary selector to enter the setting value
change state.
The focus moves to the setting value.
4 Turn the rotary selector to change the setting value.
5 Press the rotary selector to enter the setting value.
The focus moves to the setting item.
! If the [BACK] button is pressed during the process, the setting value
will not be changed.
Descriptions
Configure the settings of touch strip mode
[USER1].
= Setting the USER mode of the touch strip
Configure the settings of touch strip mode
[USER2].
= Setting the USER mode of the touch strip
Set the volume curve characteristics (velocity
curve) in response to the strength that a pad is
pressed.
Set the strength at which to press a pad to start
outputting sound.
Set the strength at which to press a pad to output
at the maximum volume level.
Set the switching method for when the pad mode
selection button is pressed.
Set the timing for switching when a pattern is
switched.
Set the path for SYNCing with this unit.
Set the brightness of the touch display.
When this is set to [ON], the screen saver starts if
the stopped state, paused state, or the state of no
operation being performed continues for at least
5 minutes.
= About the auto standby function (p. 44 )
= When transferring samples from a PC (p. 41 )
= Adjusting the touch panel (TOUCH PANEL
Set the display language to which to give priority
on this unit.
Displays this unit's software version.
Displays the amount of free space in the built-in
flash memory of this unit.
(TOUCH STRIP SETTING) (p. 43 )
(TOUCH STRIP SETTING) (p. 43 )
CALIBRATION) (p. 44 )