Download  Print this page

About The Auto Standby Function; Adjusting The Touch Panel (Touch Panel Calibration) - Pioneer TORAIZ SP-16 Operating Instructions Manual

Professional sampler
Hide thumbs

Advertisement

Parameter
The parameters that can be assigned are as follows.
PLAYBACK
AMP ENVELOPE
PITCH
VELOCITY
ATTACK
HOLD
RELEASE

Adjusting the touch panel (TOUCH PANEL CALIBRATION)

This function is for making adjustments when the touch panel of this unit is not working properly.
Tap [
UTILITY] in advance to display the UTILITY screen.
! The UTILITY screen can be displayed with the [SHIFT] button + [HOME] button.
Press the cross marks on the screen in the order of top left l top right l bottom left l bottom right.
When adjustment is finished, close the TOUCH PANEL CALIBRATION screen.
44
En
FX1
SEQUENCE
CHORUS RATE
RETRIGGER CNT
CHORUS WIDTH
RETRIGGER SPD
CHORUS PHASE
CHORUS DELAY
CHORUS
MIXRATIO
FLANGER RATE
FLANGER WIDTH
FLANGER PHASE
FLANGER DELAY
FLANGER
FEEDBACK
FLANGER
MIXRATIO

About the auto standby function

When the auto standby function is turned on, the power is automatically
set to the standby mode after four hours have passed with all of the fol-
lowing conditions met.
— That none of this unit's buttons or controls are operated.
— The track level indicators are not lit.
— The playback function is not operating.
— That no PRO DJ LINK connections are made.
— That no USB device is connected to the USB device insertion slot
(Type A terminal) on the unit's top panel.
— That not in USB MASS STORAGE MODE.
! The indicator of the [USB STOP/WAKE UP] button is lit during auto
standby.
! When the [USB STOP/WAKE UP] button is pressed, the standby
mode is canceled.
! This unit is shipped with the auto standby function turned on. If you
do not want to use the auto standby function, set [AUTO STANDBY]
to [OFF].

Advertisement

loading