Saving A Project; Quitting The System - Pioneer TORAIZ SP-16 Operating Instructions Manual

Saving a project

1 Tap [ PROJECT].
The PROJECT screen appears on the touch display. In the project screen,
you can perform operations such as loading and saving projects.
2 Turn the rotary selector to select [SAVE] and then
press the rotary selector.
A saving window pops up. The progress is indicated by a progress bar in
the pop-up screen.
! When saving is completed, the pop-up windows disappears and the
project screen appears.
! To change the project name and then save the project, select
[SAVE AS], enter a project name, and then save the project.

Quitting the system

Press the [u] switch on the rear panel of the unit.
! Do not disconnect the USB device or turn off this unit's power
while the USB indicator is lit or flashing. Doing so could delete this
unit's management data and damage the USB device, making it
impossible to read.
16
En