Download  Print this page

Using The Performance Pads - Pioneer TORAIZ SP-16 Operating Instructions Manual

Professional sampler
Hide thumbs

Advertisement

4 Turn the rotary selector to select the sample you wish
to load and then press the rotary selector.
The sample is loaded to the track, and the name of the loaded sample is
displayed at the top right of the screen.
! Press the rotary selector when a folder is selected opens or closes
the folder.
! Turning the rotary selector while pressing the [SHIFT] button moves
the focus on a folder basis (sample file lines are skipped).

Using the performance pads

Playing a sample sound
1 Press the [SLICE] button to turn the function off.
The [SLICE] button is set to the off state.
2 Press the [SCALE] button to turn the function off.
The [SCALE] button is set to the off state.
3 Hit the performance pads.
The sample assigned to each performance pad plays.
Recording a performance (dynamic
recording)
1 Press the [k] button.
The [k] button lights in red and recording is enabled.
2 Press the [d] button.
The [d] button lights in green and the sequence plays while recording
is enabled.
3 Hit the performance pads to record triggers.
A trigger is recorded at the timing that the pad is tapped. The step key to
which the trigger was input lights or flashes in the track color.
Using the operation modes of the
performance pads
Four operation mode types are available.
 Switching the track (TRACK mode)
The track corresponding to a performance pad can be switched by press-
ing the [TRACK] button.
1 Press the [TRACK] button.
The [TRACK] button lights in white.
2 Press the performance pad corresponding to the track
to which you wish to switch.
The track corresponding to the pressed performance pad is set as the
current track.
3 Press the [TRACK] button again.
The [TRACK] button turns off and the track selection mode ends.
 Muting a track (MUTE mode)
The track corresponding to a performance pad can be muted by pressing
the [MUTE] button.
1 Press the [MUTE] button.
The [MUTE] button lights in white.
2 Press the performance pad corresponding to the track
you wish to mute.
The performance pad corresponding to the muted track is dimmed.
! Mute can be set for multiple tracks at the same time.
! To cancel mute, press the performance pad corresponding to the
muted track again.
! If a performance pad is pressed while pressing the [SHIFT] button,
the corresponding tracks other than that are muted. Performing the
same operation again cancels mute for all of them.
3 Press the [MUTE] button again.
The [MUTE] button turns off and the mute mode ends.
 Playing a slice performance (SLICE mode)
Sliced sample sounds corresponding to performance pads can be
played by pressing the [SLICE] button.
1 Select the track that has the sample for which you
wish to play a slice performance assigned.
= Switching the track (TRACK mode) (p. 13 )
2 Press the [SLICE] button.
The [SLICE] button lights in white.
! The sample is sliced equally into 16 slices and the slices are
assigned in order to the performance pads.
3 Hit the performance pads.
The sample assigned to each performance pad plays.
4 Press the [SLICE] button again.
The [SLICE] button turns off and the slice performance mode ends.
 Playing a scale performance (SCALE mode)
A samples of a scale corresponding to performance pads can be played
by pressing the [SCALE] button.
1 Select the track that has the sample for which you
wish to play a scale performance assigned.
= Switching the track (TRACK mode) (p. 13 )
2 Press the [SCALE] button.
The [SCALE] button lights in white.
! The sample ascends by each semitone on the chromatic scale, treat-
ing the bottom left performance pad as the keynote.
3 Hit the performance pads.
The sample with the scale assigned to each performance pad plays.
4 Press the [SCALE] button again.
The [SCALE] button turns off and the slice performance mode ends.
13
En

Advertisement

loading

  Related Manuals for Pioneer TORAIZ SP-16