Making overall settings, adjustments, and
This screen serves as the base of all screens. It allows you to check the
assignment status of the performance pads and the status of each track.
One of the tracks is always selected. Track 1 at the bottom left is selected
A track can be selected by tapping. Tapping the selected track again (or
pressing the rotary selector) switches to the track menu screen.
If you turn the rotary selector, the track selection position moves. Turn
it clockwise to move the position in ascending order from track 1 to 16,
and then from 16 back to 1. Turn it counterclockwise to move the posi-
tion in the reverse direction.
! For details on the content displayed in the track button, refer to
Display of name of assigned sample
If a sample is assigned to a track, the name of the assigned sample is
If the sample name will not fit within the button, part of it is omitted and
the omitted part is replaced with "..."
If the [MUTE] is performed by pad operation, the indicators in the area
indicating the track number are all grayed out.
This indicates the attribute of the track that is set in the track menu.
! The sound stops when the attribute is switched, so the switch is
performed not in this screen but in the track menu of each track.
SMPL: SAMPLE track
This track plays a sample sound source.
For details on the displayed content of a SAMPLE track, refer to Display
of name of assigned sample.
THRU: THROUGH track
An external input becomes the sound source, so the sample name dis-
appears and the input source is displayed.
TRIGGER MODE and LOOP
This displays the state of how the assigned sound is played.
The turning on and off of LOOP has an effect both during a pad perfor-
mance and during a sequence performance, but TRIGGER MODE has
an effect only during a pad performance.
! In the case of GATE, the sample plays only while the pad is pressed.
! In the case of One Shot, the sample is triggered the instant the
performance pad is pressed, and plays only for the specified time.
This can be switched with the parameter adjustment knobs at the bottom of the
Status display of TIME STRETCH
This can be switched between three statuses: OFF n RSMPL
(Resample) n M.TMP (Master Tempo).