GROUND CLAMPS used for a long period of time. POWER SERVICE GROUNDING ELECTRODE SYSTEM Fig. A (NEC ART 250, PART H) NEC — NATIONAL ELECTRICAL CODE Downloaded From Disc-Player.com Pioneer Manuals...
Page 3
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE the unit. BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE Thank you for buying this Pioneer product. ATTENTION: POUR PREVENIR LES CHOCS Please read through these operating instructions so you will ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE know how to operate your model properly.
Page 4
÷ Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime. Downloaded From Disc-Player.com Pioneer Manuals...
Automatically recording and finalizing a disc ..... 21 Before You Start Manual recording ..............22 Feature of the PDR-609 CD recorder ........6 Setting the digital recording level ......... 23 Checking what’s in the box ............. 6 Setting the analog recording level ........24 Using this manual ..............
Make digital recordings from any source The PDR-609 can accept digital input via optical or coaxial cable, meaning that you can connect it to almost any other digital audio component. Also, thanks to the built in sampling rate converter, you can make direct digital recordings from satellite (usually 32kHz), DCC and DAT (up to 48kHz), as well as CD and MD (both 44.1kHz).
Storing optical cable more When storing optical cable, coil loosly as + than = shown at right. The cable may be Downloaded From Disc-Player.com Pioneer Manuals 5-14/16 in damaged if bent around sharp corners. (15 cm)
Pioneer authorized service center. Although lens cleaners for compact disc recorders are commercially available, we do not recommend using them since some may damage the lens.
Table of Contents (TOC, for short) at the beginning of the disc which tells other players exactly what's on the disc and where to find it. See Finalizing a disc on page 42 for more on finalization. 23ft. (7m) Downloaded From Disc-Player.com Pioneer Manuals...
At the time of cloth. The optical lead will only go in one writing, the Pioneer PD-F1009 is the only CD player that can way, so match up the jack and the plug perform this operation.
Connecting other Pioneer Î components If you are using a Pioneer amplifier or receiver that has this feature, you can control this unit with the multi-remote controller that came with your amplifier/receiver. The advantage of this is that you can use a single remote control to operate several components.
Plug in a pair of stereo headphones for private listening or monitoring. Sets the recording level for analog-input recording. 1 1 ERASE (p.38–39) 24 LEVEL Downloaded From Disc-Player.com Pioneer Manuals Press to start erasing tracks, or to re-initialize a disc. Use to adjust the phones volume.
Use to set the repeat mode (current track, disc, or repeat off). digital inputs. 13 PROGRAM (p.27) Use to program the playback order of tracks on a disc. 14 FADER (p.28,34) Press to fade in or fade out during playback or recording. Downloaded From Disc-Player.com Pioneer Manuals...
Lights when the coaxial digital input is selected. 1 1 AUTO TRK (p.33) Lights when automatic track numbering is on during recording. 12 MANU TRK (p.34) Lights up when manual track numbering is on during recording. Downloaded From Disc-Player.com Pioneer Manuals...
(but you index display for each track. won’t see the above display). 10 To stop playback, press 7. Take out the CD from the disc tray before Downloaded From Disc-Player.com Pioneer Manuals switching off the unit.
PROGRAM CHECK CLEAR • Fade length (p.35) SKIP ID NPUT SKIP PLAY SELECTER CLEAR Î Note: The time increment will default to when: recording is stopped; auto track numbering is turned off; power is switched off. Downloaded From Disc-Player.com Pioneer Manuals...
Showing disc Introduction to CD information recording The PDR-609 can display various kinds of The PDR-609 is designed to let you make disc and track information during both extremely high quality digital recordings playback and recording. The button onto recordable compact discs. For...
• Usually, track numbers are recorded onto the disc Power interruptions automatically when recording. If you decide to switch off Never switch off the PDR-609 while it's recording, or while the this feature (for example, when you’re recording from a display shows (Program Memory Area Recording).
SKIP ID NPUT SKIP PLAY SELECTER Record-pause (no sync) CLEAR Î If you find that synchro recording does not CD-R O1 O1 OO:OO seem to work, see the troubleshooting section on pages 40–42for possible remedies. Downloaded From Disc-Player.com Pioneer Manuals...
SYNC FINALIZE Note: If you find that synchro recording indicators start to blink. does not seem to work, see the trouble- shooting section on pages 40–42 for CD-R FINALIZE SYNC–FINAL possible remedies. SYNC Downloaded From Disc-Player.com Pioneer Manuals...
00:00, then press 8 or 3 (6 on the front panel) to start recording. If you pressed in step 3, you’ll MONITOR ¶ here, then 8 or need to press RECORD 3 (6) to start recording. Downloaded From Disc-Player.com Pioneer Manuals...
Each digital input has its own level which can be set independently. : If you are recording DTS encoded NOTE audio CDs or HDCD format CDs, the digital recording level must be set to 0.0dB for recording. Downloaded From Disc-Player.com Pioneer Manuals...
The maximum recording level ¡ ENTER should be in this area. REPEAT RANDOM NAME CLIP FADER PROGRAM CHECK CLEAR When you’re happy with the recording NPUT SKIP ID SKIP PLAY SELECTER CLEAR level, stop the source. Î Downloaded From Disc-Player.com Pioneer Manuals...
• Pressing the jog dial ( )and ENTER FADER PROGRAM CHECK CLEAR holding for 3 seconds resets to center NPUT SKIP ID SKIP PLAY SELECTER CLEAR position. Î Press the jog dial (ENTER) to confirm the balance. Downloaded From Disc-Player.com Pioneer Manuals...
DELETE you'll see how long there is still to go in SYNCHRO Legato Link Conversion CD TEXT the display. The player stops when finished. For a CD-R, the CD-R indicator now changes to simply CD. Downloaded From Disc-Player.com Pioneer Manuals...
Turn the jog dial to select a track; push to enter it into the playlist. Press 3 (6 on the front panel) to start playback. You must press if you want to PROGRAM enter another track after you have started playback. Downloaded From Disc-Player.com Pioneer Manuals...
• If there were no skip IDs on the disc in The fader indicator in the display blinks lights if there are skip and the volume starts to fade in. the first place, the button SKIP PLAY IDs present on the disc. has no effect. Downloaded From Disc-Player.com Pioneer Manuals...
Until you eject the disc, the recorder stores NPUT SKIP ID SKIP PLAY SELECTER CLEAR the changes in skip ID information in its Î memory. On pressing 0, the recorder writes the new skip ID information onto Downloaded From Disc-Player.com Pioneer Manuals the disc.
0!"#$%&’()*+,-./<=> your selection, or press ENTER. position you want and repeating steps ?@[]ˆ_'{|}<space> If the disc doesn't already have a name, 4–6. the character display is blank, with a blinking cursor on the first character. Downloaded From Disc-Player.com Pioneer Manuals...
Edit the text. See step 6 of Using CD text. Eject or finalize the disc. See Finalizing a disc on page 26 if you have finished all the recording and editing that you want do to. Downloaded From Disc-Player.com Pioneer Manuals...
Use the 1 and ¡ buttons to move FADER PROGRAM CHECK CLEAR SKIP ID NPUT SKIP PLAY the cursor around the character display. SELECTER CLEAR Î Press NAME CLIP again. The most recently clipped name appears. Downloaded From Disc-Player.com Pioneer Manuals...
REC SYNCHRO MANUAL Make sure automatic track TIME DISPLAY numbering is switched OFF. /CHARA SCROLL PQRS WXYZ If the indicator is lit, press AUTO TRK MENU/ DELETE MARK NAME to switch it off. AUTO MANUAL Downloaded From Disc-Player.com Pioneer Manuals...
(in seconds). record a fade out and stop recording. Each turn will take you forward (or back) one second. The default is 5 seconds. FADER Press the jog dial (ENTER) to Downloaded From Disc-Player.com Pioneer Manuals confirm the new fade length.
If you press ¶ again while the RECORD track's playing, the recorder jumps to the end of the track and goes into record- pause. When the track has played out, the recorder automatically enters record-pause Downloaded From Disc-Player.com Pioneer Manuals again.
Start playing the digital source. Make sure that the input selector is set to the correct digital input. Press MONITOR. The display shows an’t if the COPY source is digital-copy protected. • Press again to switch MONITOR monitoring off. Downloaded From Disc-Player.com Pioneer Manuals...
You must eject, then re-insert the disc if you want to record any new tracks. See Finalizing a disc on page 26 if you have finished all the recording and editing that you want do to. Downloaded From Disc-Player.com Pioneer Manuals...
You can halt this erase process by holding CD TEXT Legato Link Conversion down the 7 button for 10 seconds. Eject the disc. You must eject, then re-insert the disc if you want to record any new tracks. Downloaded From Disc-Player.com Pioneer Manuals...
• CD players whose digital output does not include a sub-signal • Portable CD, MD or DVD players which do not output a digital signal when stopped. Downloaded From Disc-Player.com Pioneer Manuals...
Page 42
It’s often easy to mistake incorrect operation for trouble and malfunction of the unit. If you think there is something wrong with the component, check the points below first. If the problem persists, contact you nearest Pioneer-authorized service center and have them check over the unit.
• Audio cord ................... 2 • AC power cord ................1 • Operating Instructions ............... 1 • Warranty card ................1 NOTE : The specifications and design of this product are subject to change without notice, due to improvements. Downloaded From Disc-Player.com Pioneer Manuals...
Page 44
Si ce produit doit être réparé au Canada, veuillez vous adresser à un distributeur autorisée Pioneer au Canada pour obtenir le nom de la Société de Service Autorisée Pioneer le plus près de chez vous. Ou encore, veuillez communiquer avec le Service de Clientèle de Pioneer: Pioneer électroniques du Canada, Inc.