Gluneo ® Lite Test Strip; Before Testing - Infopia GluNEO Lite Instructions For Use Manual

®
GluNEO Lite Test Strip
Test Strip Port
Contact Bar
Caution
®
1. Store the GluNEO Lite test strip vials in a cool, dry place. Keep out of direct sunlight.
Do not freeze.
2. Store test strips in their original vial only. Do not mix the test strips in new vials or in
any other container.
3. Immediately replace the vial cap and close tightly after removing any test strips from
the vial.
4. Make a note of the expiry date, which is six months from the date you first open a new
®
vial of test strips. Throw GluNEO Lite test strips and vial away after the expiry date.
5. Do not use the test strips after the expiration date printed on the package or vial, since
it may cause inaccurate results.
®
6. GluNEO Lite test strips should be single use only. DO NOT RE-USE.
7. Do not test at temperatures below 10℃(50°F) or above 40℃(104°F).
8. Do not test in the condition that humidity is below 10% or above 90%.
9. Do not bend, cut, or alter the test strip.
10. Avoid getting dirt, food, and water on the test strip with wet hands.
11. Avoid getting dirt, food, and water on the color-coding label (backside of test strip)
12. Refer to additional information in the GluNEO
®
Lite test strip package.
• 10 •

Before Testing

WARNING
To reduce the chance of infection:
1. Lancing device and lancets should NOT be shared with others.
2. Always use a new lancet and a new blood glucose test strip.
3. Practice using the lancing device and become accustomed with its use.
4. Lancets and blood glucose test strips should be single use only.
5. Wash your hands in warm clean running water using soap before testing.
6. Avoid getting hand lotion, oils, dirt or debris on the lancets or on the lancing device.
7. Dry your hands completely before testing.
• 11 •