Table of Contents
Advertisement
1. OVERVIEW
1.1 Package content
□ Network camera
□ Installation Guide
□ CD-ROM disc (including user manuals & CMS software "Video Viewer")
1.2 Rear Panel
Ethernet
1. OVERVIEW
1.1 Package content
□ Network camera
□ Installation Guide
□ CD-ROM disc (including user manuals & CMS software "Video Viewer")
1.2 Rear Panel
Ethernet
Ethernet:
Connect your network cable.
DC 5V:
Connect the supplied regulated power supply.
Reset:
With the power connected, press and hold for a few seconds to reset all
parameters, including the IP address to factory default settings.
The camera will reboot after default reset. You may check the blinking
frequency of the LED indicator to know if the camera is in the reset default
mode.
Please do not disconnect your camera during the reset process.
Ethernet:
Connect your network cable.
DC 5V:
Connect the supplied regulated power supply.
Reset:
With the power connected, press and hold for a few seconds to reset all
parameters, including the IP address to factory default settings.
The camera will reboot after default reset. You may check the blinking
frequency of the LED indicator to know if the camera is in the reset default
mode.
Please do not disconnect your camera during the reset process.
□ Camera Bracket
□ Adapter
1
□ Camera Bracket
□ Adapter
1
- Quick Links:
- Network Connection Via Lan
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AVN304 and is the answer not in the manual?