Siemens 7SR242 Duobias Technical Manual page 81

BINARY OUTPUT METERS
to view
BO 1-8
BO 9-14
VIRTUAL METERS
to view
V 1-8 ---- ----
V 9-16 ---- ----
COMMUNICATION METERS
to view
COM1
COM2
COM3
COM4
COM1 TRAFFIC
Tx1
Rx1
Rx1 Errors
COM2 TRAFFIC
Tx2
Rx2
Rx2 Errors
COM3 TRAFFIC
Tx3
Rx3
Rx3 Errors
COM4 TRAFFIC
Tx4
Rx4
Rx4 Errors
MISCELLANEOUS METERS
to view
Date
Time
Waveform Recs
Fault Recs
Event Recs
Data Log Recs
©2015 Siemens Protection Devices Limited
Chapter 2) 7SR242 Duobias Settings, Configuration & Instruments Guide
This is the sub-group that includes all the meters that are
associated with the Binary Outputs TEST/RESET
access to this sub-group
---- ----
Displays the state of DC binary Outputs 1 to 8. (The number
---- --
of binary outputs may vary depending on model)
This is the sub-group that shows the state of the virtual status inputs in
the relay TEST/RESET
Displays the state of Virtual Outputs 1 to 16 (The number of virtual
inputs will vary depending on model)
This is the sub-group that includes all the meters that are
associated with Communications ports TEST/RESET
allows access to this sub-group
Displays which com ports are currently active
Displays traffic on Com1
0
0
0
Displays traffic on Com2
0
0
0
Displays traffic on Com3
0
0
0
Displays traffic on Com4
0
0
0
This is the sub-group that includes indication such as the
relays time and date, the amount of fault and waveform
records stored in the relay TEST/RESET
this sub-group
DD/MM/YYYY This meter displays the date and time and the number of
Fault records and Event records stored in the relay.
HH:MM:SS
0
The records stored in the relay can be cleared using the
0
options in the Settings Menu>Data Storage function.
0
0
allows access to this sub-group
Chapter 2 Page 15 of 22
allows
allows access to