Disassembly Of Stick And Gearbox; Disassembly Of Camshaft; Disassembly Of Crankshaft; Assembly - PEUGEOT XP6 50 Manual

DISASSEMBLY OF THE SELECTOR AND THE GEARBOX
DISASSEMBLY OF THE SELECTOR
SHAFT:
th
Put the selector drum in 4 position (pin of the
mechanism looking towards the fork shaft of the
secondary shaft).
Remove the selector shaft equipped with its two
friction
washers (10x16x0.6(A) and 12x17x0.6 (B)).
DISASSEMBLY OF THE GEARBOX:
Remove the friction washer from the secondary
shaft(20.4x25x0.6).
Remove the friction washer from the selector
drum (10x16x0.6).
Remove and disassemble the fork shaft from the
secondary shaft.
Take out the whole:
Main shaft
Secondary shaft
Selector drum
Forks
Remove the anchorage ball and its driver
spring.
nd
Remove the 2 friction washer (14.5x27x0.6)
from the secondary shaft.
DISASSEMBLY OF THE CAMSHAFT
The camshaft is fixed on its bearing.
Hit its end with a plastic hammer to disassemble
it.
DISASSEMBLY OF THE CRANKSHAFT
Disassemble the whole connecting rod /
crankshaft, the modified separator and the
torical joint (the crankshaft is assembled on its
bearing and it is lubricated).
Página 13 de 34