Paradyne COMSPHERE 3800PLUS User Manual page 65

Editing and Saving a Configuration Option
The following example shows how to change the
Remote Access Password using the DCP. (If you ever
intend to access another 3800Plus Series modem via the
Remote branch of the Top-Level menu, the Remote
Access Password must be the same for both modems.) By
following these procedures you learn how to load a
factory preset configuration area (in this case, Async
Dial), how to edit a configuration option (Remote Access
Password), and how to save changes to a configuration
area (Active (Saved)). The shaded key indicates what key
to press.
Idle : 28.8
Test
F1 F2
Select Configure from the Top-Level menu.
Ld EditArea frm
Activ (Operating)
F1 F2
Ld EditArea frm
Factory
F1 F2
Select the Factory configuration area.
Ld Fact Preset :
Async_Dial
F1 F2
3980-A2-GB30-40
Configure
F3
>
F3
<
F3
>
F3
October 1998
Select Async_Dial.
Choose Function
Edit
F1 F2
Select Edit.
Edit StrapGroup
DTE_Interface
F1 F2
Scroll to and select the Misc configuration options
group.
Edit StrapGroup
Test
F1 F2
StrapsWhenDisc
Nxt No_Change
F1 F2
Select Nxt until RemAccssPasswrd appears.
RemAccssPasswrd
°00000000
Nxt
F1 F2
Configure Branch
Save
F3
>
F3
<
Misc
F3
>
F3
F3
8-5