Paradyne COMSPHERE 3800PLUS User Manual page 149

AT Command
%B n , %BL n
Modulation/Data Rate
Sets the modulation and maximum dial VF rate. The same function can be
performed with S-register S41; the %B and %BL commands are provided
for compatibility with environments where those commands are used.
The %B300 and %B1200 commands work in conjunction with the B
(ITU-T/ Bell Mode) command to determine modulation.
The %B2400 through %B33600 commands set the modem for V.34 or
V.34 extended operation.
The %BL2400 through %BL19200 commands set the modem for V.22bis,
V.32, V.32bis, or V.32 terbo operation.
%B300
%B1200
%B2400
%B4800
%B7200
%B9600
%B12000 V.34 — max. rate 12,000 bps
%B14400 V.34 — max. rate 14,400 bps
%B16800 V.34 — max. rate 16,800 bps
%B19200 V.34 — max. rate 19,200 bps
%B21600 V.34 — max. rate 21,600 bps
%B24000 V.34 — max. rate 24,000bps
%B26400 V.34 — max. rate 26,400 bps
%B28800 V.34 — max. rate 28,800 bps
%B31200 V.34 — max. rate 31,200 bps
%B33600 V.34 — max. rate 33,600 bps
%BL2400 V.22bis — max. rate 2400 bps
%BL4800 V.32bis/ V.32 — max. rate 4800 bps
%BL7200 V.32bis — max. rate 7200 bps
%BL9600 V.32bis/ V.32 — max. rate 9600 bps
%BL12000 V.32bis — max. rate 12,000 bps
%BL14400 V.32bis — max. rate 14,400 bps
%BL16800 V.32 terbo — max. rate 16,800 bps
%BL19200 V.32 terbo — max. rate 19,200 bps
%C n MNP5 Data Compression
%C0 Disable.
%C1 Enable.
3980-A2-GB30-40
Table 13-1
(13 of 15)
3800 Plus AT Commands
Description
V.21 or Bell 103 — max. rate 300 bps
V.22 or Bell 212A — max. rate 1200 bps
V.34 — max. rate 2400 bps
V.34 — max. rate 4800 bps
V.34 — max. rate 7200 bps
V.34 — max. rate 9600 bps
October 1998
AT Command Set and S-Registers
Front Panel Branch
Configure\Edit\
Dial Line
(S41=10, S41=11)
(S41=7, S41=8)
(S41=40)
(S41=39)
(S41=38)
(S41=37)
(S41=36)
(S41=35)
(S41=34)
(S41=33)
(S41=32)
(S41=31)
(S41=30)
(S41=29)
(S41=28)
(S41=27)
(S41=6)
(S41=5)
(S41=4)
(S41=3)
(S41=2)
(S41=1)
(S41=21)
(S41=20)
Configure\Edit\
V42/MNP/Buffer
13-15