Paradyne COMSPHERE 3800PLUS User Manual page 140

COMSPHERE 3800Plus Modems
AT Command
P Pulse Dial
Sets the modem for pulse dial mode. See the D n command.
Q n Result Codes
Q0 Enables modem to send result codes to the DTE.
Q1 Disables modem from sending result codes to the DTE.
Q2 Enables in Originate mode only for modem to send result codes to
the DTE. Required for most UNIX applications.
S r = n Change S-Register
Changes contents of S-register (where r is the S-Register, and n is the
new value). See
S r ? Display S-Register
Displays value of S-register where r is the S-register number.
T Tone Dial
Sets the modem for tone dial mode.
V n Result Codes Format
V0 Displays result codes in Number (1) format digits.
V1 Displays result codes as text.
V2 Displays result codes in Number (2) format (digits).
13-6
Table 13-1
(4 of 15)
3800 Plus AT Commands
Description
13-2, 3800 Plus S-Registers.
Table
October 1998
Front Panel Branch
Configure\Edit\
Line Dialer
Configure\Edit\
DTE Dialer
None
None
Configure\Edit\
Line Dialer
Configure\Edit\
DTE Dialer
3980-A2-GB30-40