Adjusting Scan Pause Time; Switching Delay On/Off; Limiting Scan Pause Time To 5 Seconds; Adjusting Views - Sony ICF-SC1PC Operating Instructions Manual

Scanning receiver controller

Hide thumbs Also See for ICF-SC1PC:

Table of Contents

Adjusting scan pause time

By default, DELAY is turned on.

Click [DELAY] in the main window to turn off DELAY.

The DELAY indication will disappear.

Click [DELAY] again to turn it on again.

DELAY off: The receiver resumes scanning the moment

signal reception is broken during scan pause.

DELAY on: The receiver does not resume scanning until

there is a signal break of 2 seconds.

Limiting scan pause time to 5

seconds

Check either [Until The Signal Stops] or [5 Seconds] under

[Pause Time] from the [Preferences] menu. By default,

scan pause is set to "Until The Signal Stops".

Until The Signal Stops: The receiver will remain in scan

pause until signal reception is broken or scanning

is resumed manually.

5 Seconds: The receiver will pause scan only for 5

seconds and resume scanning automatically at

every stop.

Choose from 4 display patterns with different colors.

Check a pattern from Pattern 1 - 4 from the [Views] menu.

The pointer guide explains the function of the buttons

when the mouse pointer is moved to point a button.

The pointer guide is turned on by default.

Uncheck [Guide] in the [Views] menu. Check it again to

turn it on.

Table of Contents