Command Reference - Sony ICF-SC1PC Operating Instructions Manual

Command reference

File menu
[Exit]
Operations menu
[Tune]...
[Direct]
[Preset]
[Intelligent] Goes into Intelligent Memory tuning.
[Scan]
[Minus]
[Plus]
[Priority]
[Skip]
[Delay]
[Power]
Preferences menu
[Memory Scan Preferences]
[Programmable Scan Preferences]
[Skip Frequency Preferences]
[Pause Time]...
[Until The Signal Stops]
[5 Seconds]
12
Quits application.
Goes into Direct tuning.
Goes into Preset tuning.
Same as the SCAN START/STOP button
(Ctrl + S).
Same as the – button (Ctrl + M).
Same as the + button (Ctrl + L).
Same as the PRIORITY button (Ctrl + R).
Same as the SKIP button (Ctrl + K).
Same as the DELAY button (Ctrl + D).
Same as the POWER button (Ctrl + P).
Preset frequencies to the memory in the
Memory Scan Preferences dialog.
Specify frequency ranges in the
Programmable Scan Preferences dialog.
Specify SKIP-frequencies in the Skip
Frequency Preferences dialog.
Scanning pauses as long as the signal is received
and resumes automatically when the signal breaks.
Scanning pauses for 5 seconds at reception and
then resumes scanning automatically.